Bracelet Size Guide: How to Measure Your Wrist and Find a Comfortable Fit

To find your bracelet size, measure your wrist where you want the bracelet to sit, then check the length and fastening of the piece you're considering. Your wrist measurement is the starting point. A chain bracelet needs some room to move, and the right amount depends on its shape and how you like to wear it.

Our printable paper sizer helps you get that first measurement at home. You can also use a flexible tape measure.

Measure your wrist with our printable guide

You'll find this measuring paper in the Size Guide on our bracelet product pages, or you can download it here. Choose the unit used in the product dimensions:

• Download the bracelet measuring paper in centimeters (PDF)
• Download the bracelet measuring paper in inches (PDF)

1. Print the PDF on A4 paper at 100% or actual size. Turn off fit-to-page and automatic resizing. Do not print a screenshot.
2. Check the printed reference line before cutting. It should measure 5.4 cm on the centimeter version or 2.13 inches on the inch version. Compare it with a standard bank card's short edge, or check it with a ruler. If it doesn't match, correct the print settings and reprint.
3. Cut around the full sizer outline and carefully open the slit marked CUT ME.
4. Wrap the strip around the wrist you'll wear the bracelet on, at your preferred position. Pass the narrow end through the slit. Keep the paper flat against your skin, without squeezing or leaving a gap.
5. Read the number where the strip meets the slit. Write down the number and unit, then measure again to check it.

No printer? Wrap a narrow strip of plain paper around the same spot, mark where the starting edge overlaps it, and measure from that edge to the mark with a ruler. Avoid stretchy string. If the printed scale doesn't reach around your wrist, use a tape measure instead of enlarging the PDF.

Wrist measurement is not bracelet length

Your wrist circumference measures your body. A bracelet's listed length may describe the opened piece, including its clasp, or a base length with a separate extender. Read the product's Specifications before comparing the two. A 16 cm wrist measurement does not automatically mean you should buy a bracelet listed as 16 cm.

If you already own a comfortable fine-chain bracelet, use it as a reference. Open it and lay it straight without pulling. Measure from the clasp's fastening point to the link you actually use, leaving out the unused extender tail. This is more useful when comparing similar chains than when switching to a thick beaded style.

Beads occupy space inside the loop, so equal listed lengths can feel different on your wrist. An extender only adjusts within its usable range; it can't make the bracelet shorter than its shortest fastening point. If the listing doesn't explain its measurement or shortest and longest fastening lengths, ask us to confirm the fit before ordering.

How tight should a bracelet be?

A close-fitting chain should let you bend your wrist without pressing into your skin or pulling at the clasp. For a looser fit, look for a little movement along your arm without the bracelet slipping over your hand.

You can loosen the paper loop slightly to explore how much movement you prefer. Keep that reading separate from your snug wrist measurement. It gives you a preference to discuss, not a guaranteed bracelet size: paper doesn't reproduce a bracelet's thickness, weight, or clasp.

Try typing with it on. Does a bead press against the desk, or does a charm keep catching your sleeve? If you're constantly pushing it back into place, try a shorter fastening point if the design allows one.

Being able to slide a finger underneath can give you a rough sense of space, but it isn't a sizing formula. Finger size and bracelet thickness vary. Judge the fit while moving your hand, and remove the bracelet if it pinches or causes discomfort.

Check a stack together

Try bracelets together before settling on the fit, especially if you wear a watch. They may crowd each other even when each feels fine alone. Measure higher on your arm if that's where one will sit. Once the fit works, our jewelry layering guide can help with arranging different shapes and weights.

A slip-on bangle needs a different measurement

A closed bangle has to pass over your hand. Follow the printable guide's instruction to measure the widest part of your hand, bringing your fingers together as you would when sliding it on. Wrist circumference alone won't tell you whether it can pass your knuckles. Check the bangle's inner dimensions and shape, and don't force a rigid piece over your hand.

Buying a bracelet as a gift?

Ask for a wrist measurement or the fastening length of a similar bracelet the recipient already wears. Even with an adjustable design, you'll need to check the range. If you can't confirm their size, our guide to choosing jewelry when you don't know her style discusses gift options with fewer sizing uncertainties.

Explore Refi Miro bracelets, then check the length and fastening details of the design you like.